AOS Solar was started in 2005 to combine the material cost and manufacturing process economics of thin film solar PV with the efficiency and reliability of crystalline silicon solar PV. The company have an initial prototype solar coupon built and tested using technology. nnThe company's key enablers to achieve market traction are the cost and reliability of the company's product. The silicon on glass (SOG) technology the company are developing will enable solar panels costing around $1/watt to manufacture on the company's pilot line, with lower costs as the company ramp up production due to manufacturing efficiencies and learning curve. Solar silicon is an established technology with proven 20+ year life (versus newer thin film technologies). nnToday the company have working coupons at 7.5% efficiency and the company are working to scale up to larger cells with target 9% efficiency in Q-1, 2008. The company's form factor and efficiency limits are based on first generation technology. By scaling the company's manufacturing and improving the company's technology the company expect to achieve 16 - 18% efficiency in a single junction and 22 - 24% efficiency in a double junction module. nnThe company's A round funding will be used to continue development of the company's equipment / process technology in order to manufacture on larger substrates (2.5' x 4' glass) and to design a scaled up manufacturing line (30+MW annual capacity) based on this development.

Ambp Technology Corporation is a company that received a SBIR Phase I grant for a project entitled: Photovoltaic Laser Annealing System. Their project proposes to achieve recently reported gains in CIGS solar cell efficiency from in-situ laser deposition, by using an ex-situ laser annealing approach that is compatible with an existing pilot manufacturing system. The proposed ex-situ approach will not need to heat the substrate above the 425C value used to manufacture CIGS solar cells on flexible polyimide substrates. Solar cell technology is an energy alternative that can reduce America's dependence on fossil-fuel-generated electric power. A truly cost effective technology is to build cells using methods whose thermal budgets are low enough to enable the use of inexpensive polymer substrates, which enables large-area roll-to-roll processing and automated cell-to-cell connection techniques. AMBP Tech Corporation will develop and demonstrate a tool to improve solar cell performance that is immediately applicable in the solar-cell manufacturing marketplace.

Camstar Systems provides enterprise manufacturing execution and quality management software solutions to a global clientele. It enables global networks of manufacturers, brand owners, and suppliers to produce the highest quality products quickly and efficiently. The company was founded in 1984 and is based in Charlotte, North Carolina. Camstar Systems was acquired by Samsung.

The Power-Spar is a high efficiency solar concentrator that can be configured for electricity, heat, cooling and/or lighting solutions. The Power-Spar system consists of a parabolic trough reflector which concentrates the sun's energy onto a modular absorber. The absorber converts the sun's energy to electricity (via high efficiency multi-sun photovoltaic cells), or to heat (via a patented absorption surface) or transports the light to the buildings' interior (via optical cabling). The system is designed for easy integration with heat recovery systems, turbines, thermal based chillers and geo-thermal solutions to maximize the thermal, electrical and lighting outputs. This efficient co-generation yields unprecedented dollar value. Capable of capturing up to 80% of the sun's energy, Power- Spar systems can reduce typical building energy bills by as much as 70%/year!

Solarno is a company that received a STTR Phase I grant for a project entitled: Synthesis of multifunctional nanofibrous polyaniline/carbon composites. Their their award is funded under the American Recovery and Reinvestment Act of 2009 and their project will develop novel multifunctional materials based on polyaniline (PAni) nanofibers (PANFs) and carbon nanofibers(CNFs) for energy storage. Although PAni composites have been reported for a wide range of applications, including sensors, biosensors, photoelectrochromic cells, etc., due to their excellent electrical, thermal and mechanical properties, none capitalize on the enhanced properties expected from the combination of PANF with CNF. PANFs have greater electronic conductivity than PAni nanospheres and nanorods and can be synthesized on a variety of substrates. Solarno will use a proprietary process for synthesizing composites of PANFs on CNFs. In Phase I Solarno will use these composites as electrode materials for asymmetric supercapacitors, an enabling technology that provides both high energy and power, with the specific technical objectives of: synthesizing and characterizing PANFs on CNF substrates, and achieving supercapacitor performance of 15 Wh/kg, 10 kW/kg and >10 cycles, thus far exceeding current lead acid batteries in terms of power and cycle life. In Phase II we will improve the energy density of these devices to enable potential replacement of such batteries, and explore other functions for the composites, such as sensors and electro-chemical devices. The PANF/CNF composites developed by Solarno will be introduced to the supercapacitor market via materials sales, and partnering/licensing arrangements, and later to related electrochemical functions/applications. Solarno is targeting requirements of the Hybrid Electric Vehicle (HEV) market for its initial supercapacitor designs, and as such, the ultimate customers will be major automobile manufacturers. The market requires that capacitors provide higher energy density, reduced size, higher reliability, and lower cost. Commercially available EDLCs commonly provide energy densities around 4 Wh/kg, and power densities between 15-21 kW/kg. The supercapacitor developed here can excel in this market by providing energy density > 25 Wh/kg and better reliability (>2.0 x 104 cycles); the Phase I work will optimize the properties of our PANF/CNF composite to meet this goal. The supercapacitors will also be well-suited for load-leveling for renewable energy sources; direct societal benefits will come from improving the viability of HEVs and renewable sources, tied to reductions in fossil fuel consumption, providing bridge power for wind and solar power farms, and partially replacing lead acid storage batteries. The results of this work in optimizing PAni composites for supercapacitors will translate well into improved functionality for other applications.

Cima NanoTech is a smart materials company specializing in the development of next-generation transparent conductors. Cima NanoTech developed the proprietary SANTE Technology, a silver nanoparticle technology that self-assembles into a random mesh-like network when coated on a substrate, enabling transparent conductors with excellent electrical conductivity, high transparency and flexibility. SANTE Technology enables increased performance for new applications in a multitude of markets, from ultra-responsive large format multi-touch screens to electromagnetic interference (EMI) shielding, transparent heating, photovoltaic, OLED lighting, flexible displays and more.