SENSeOR designs and manufactures sensors for original equipment manufacturers (OEMs) as well as end users. SENSeOR combines competencies and capabilities to satisfy customer use of this break-through technology. SENSeOR aims to be their ideal partner offering leading services, technology & IP and products download brochure Breakthrough Solutions become possible: Wireless operation yet the sensor does not require an energy source
Missing: SENSeOR's Product Demo & Case Studies
Promote your product offering to tech buyers.
Reach 1000s of buyers who use CB Insights to identify vendors, demo products, and make purchasing decisions.
Missing: SENSeOR's Product & Differentiators
Don’t let your products get skipped. Buyers use our vendor rankings to shortlist companies and drive requests for proposals (RFPs).
SENSeOR has filed 18 patents.
Acoustics, Polymers, Sensors, Nanotechnology, Biotechnology
Acoustics, Polymers, Sensors, Nanotechnology, Biotechnology
Latest SENSeOR News
Sep 24, 2015
The new wireless battery-less temperature monitoring system for electric equipment sold by SENSeOR has been granted a worldwide license-free use in medium-voltage air-insulated switchgears. SENSeOR S1 system for switchgear monitoring SOPHIA ANTIPOLIS, France - Sept. 24, 2015 - PRLog -- The new wireless battery-less temperature monitoring system for electric equipment sold by SENSeOR has been granted a worldwide license-free use in medium-voltage air-insulated switchgears enabling a wide deployment of this wireless solution in any substation or plant over the World, for dynamic load management, preventive and only when required maintenance and life-cycle cost optimization. Valbonne - Sophia Antipolis, France – September 24th 2015 – Achieve on existing electrical grid the flexibility required to integrate optimally renewable distributed intermittent energies is a crucial challenge for TSOs and DSOs over the World when copping with “how to build a Smart Grid”. Dynamic load management is one of the solutions, achievable on existing equipment by “pushing their limits” while closely supervising it, to ensure reliable and safe operation. Temperature is a key indicator to monitor, as a temperature increase can be a sign of overload, faulty operation or potential failure. The wireless passive sensors from SENSeOR enable to monitor the temperature of the most critical components at the very heart of the equipment, where other systems are not applicable. Up to 15 points can be monitored in a switchgear with SENSeOR’s systems: the circuit breakers arms, the cable connections, the busbars connections. The sensors feature an optimized form-factor for safe operation inside switchgears up to 545 kV and 5000 A. Their patented design makes them the most robust and accurate wireless passive SAW (Surface Acoustic Waves) sensors on the market. Connected to a Modbus-RTU network, the system provides real-time data, 24/7, in the control room through customer gateway or HMI. SENSeOR’s Energy S1 solutions also feature innovative, patented interrogation methods and transceiver hardware enabling multiple sensors interrogation with robust, reliable, self-tested, self-healing wireless communication in the metallic cavity of the switchgear cabinet, while guaranteeing the license-free use with very low levels of RF-emission. Indeed, the new systems Energy S1 for medium-voltage air-insulated switchgears are the first and only worldwide certified systems, enabling their implementation very easily in any substation. The modular fastening system for the wireless sensors, the user-friendly commissioning interface and the automatic sensor detection shorten the installation time and minimize cost, even in retrofit. OEMs, solution providers, integrators and panel builders can get an OEM version of the system to implement it into their own solutions and equipment. In addition to load management, the real-time data and trend analysis in post-processing facilitate reliable decision-making for proactive asset management and maintenance planning, shortening downtime, avoiding outages, and extending equipment life-cycle while exploiting it optimally. Thanks to the SAW technology scalability and versatility, additional functionalities are opened (humidity, ambient temperature, partial discharge) and these systems are also compatible with transformer monitoring, Gas Insulated Switchgears monitoring, and real-time temperature monitoring of all other equipment over the Smart Grid. Product information: System Energy S1 Circuit Breaker: 6 sensors – Ambient temperature in option System Energy S1 Switchgear: 12 sensors – Ambient temperature in option System Energy S1 Multi-cubicles: 3 sets of 6 sensors for 3 adjacent cubicles monitored with a single transceiver – Ambient temperature in each cubicle in option Compliance with IEC 62271 (ANSI C37-20 pending) Interrogation distance compatible with typical dimensions of primary and secondary AIS cubicles (ex. : 800x1550x2300 mm) Accuracy: ± 2°C Communication protocol: Modbus-RTU over RS485 through RJ45 System options: Local/remote programmable alerts, Connector for additional sensors (Humidity, Partial Discharge), analog output Sensors (TSA EV01 or TSA EV11 – 15 compatible references available): Temperature range: -25°C, 150°C Diameter: 34 mm – Height: 21 mm – Weight: 44 g Modular Velcro strip fixation or M5 screw in sensor basis Transceiver HTR01 for switchgear monitoring: Supply voltage: 24V DC in the cabinet Consumption: Frequency Band: [430 MHz – 450 MHz] Dimensions: 116x110x22 mm Rail DIN mounting in low-voltage compartment Please refer to product datasheets for more details. Contact
SENSeOR Frequently Asked Questions (FAQ)
When was SENSeOR founded?
SENSeOR was founded in 2006.
What is SENSeOR's latest funding round?
SENSeOR's latest funding round is Other Investors.
Who are the investors of SENSeOR?
Investors of SENSeOR include Banque de Vizille.
Who are SENSeOR's competitors?
Competitors of SENSeOR include Ball Wave.
Compare SENSeOR to Competitors
API Technologies designs, develops and manufactures electronic systems, modules, and components for tehcnically demanding RF, microwave, millimeterwave, electromagnetic, power and security applications. API Technologies products are used by global defense, industrial, and commercial customers in the areas of commercial aerospace, wireless communications, medical, oil and gas, electronic warfare, unmanned systems, C4ISR, missile defense, harsh environments, satellites, and space. On May 9th, 2019, API Technologies was acquired by AEA Investors, terms of the agreement were not disclosed.
Sensor Technology designs and manufactures piezoelectric ceramic materials, custom acoustic transducers, and custom hydrophones.
Abracon is a global manufacturer of frequency control, signal conditioning, clock distribution, and magnetic components. Abracon offers a wide selection of quartz timing crystals, crystal and MEMS oscillators, real-time clocks, antennas, Bluetooth modules, ceramic resonators, SAW filters and resonators, inductors, transformers, circuit protection components, and wireless RF antennas. The company is ISO9001-2008 certified with design & application engineering resources in California & Illinois; and Sales offices in Texas, California, China, Taiwan, Singapore, Scotland, and Germany. Abracon's products are offered through its Global Distribution Network. The company was founded in 1992 and is based in Spicewood, Texas.
Tiger Optics develops spectrometers used in an array of industries including semiconductor fabrication, medical diagnostics, and environmental monitoring. Seven years ago Tiger Optics introduced the world's first commercial "Continuous Wave-Cavity Ring Down Spectroscopy" (CW-CRDS) analyzer, and today, hundreds of these robust units are now in service throughout the world.
Michell Instruments Group is a designer and manufacturer of sensors and instrumentation for the precise measurement and analysis of humidity, moisture, dew point, and oxygen throughout industrial processes. Michell's products are used for process control and optimization of production efficiency. The company's clients span a wide variety of end markets including the oil and gas, power generation, pharmaceutical, compressed air, and food processing industries.
Ball Wave is engaged in the development, manufacture, and distribution of sensors, as well as R&D and consultation services. The company has developed a ball surface acoustic wave (SAW) sensor, as well as a trace moisture sensor for the semiconductor, as well as oil and gas, industries.
Discover the right solution for your team
The CB Insights tech market intelligence platform analyzes millions of data points on vendors, products, partnerships, and patents to help your team find their next technology solution.