The profile is currenly unclaimed by the seller. All information is provided by CB Insights.

luraco.com

About Luraco Technologies

Luraco Technologies is a company that received a Department of Defense SBIR/STTR grant for a project entitled: Distributed Full Authority Digital Engine Control (FADEC) Workload Reduction Through Standardization of Intelligent Fault Tolerant Sensing. The abstract given for this project is as follows: Currently, Air Force aircraft engines rely heavily on Centralized engine Control System (CCS) architectures. These architectures consist of a Full Authority Digital Electronic Control (FADEC) module that is hard-wired to sensors and actuators. As a result, new control and sensing technology is slowly adopted within aircraft engines, and when these adoptions are made the overhaul cost is high. Additionally, the FADEC is often unable to pinpoint sensor, actuator, and engine component faults, and does not provide the ability for sensors to calibrate themselves in response to environmental (in particular temperature) conditions. DIMSens provides the Air Force with a device that is able to withstand aircraft engine environments, network with various sensors, actuators, and controllers, and interface with various sensor modalities and technologies. To accomplish this DIMSens will utilize a standardized data bus, open communication protocols, incorporate sensor electronic data sheets, and provide the required environmental barrier between the sensor and DIMSens electronics. DIMSens will be capable of interfacing with any device that utilizes the same data bus as it uses, and either pre-processed or processed sensor data is accessible from it via a set of open commands. IEEE 1451 sensors will be supported by DIMSens. BENEFIT:DIMSens is expected to reduce aircraft costs in several different ways. First, DIMSens will enable new control and sensor technology, which usually reduces aircraft weight, increases engine efficiency, and/or has some other tangible aircraft cost benefit, to be readily adopted into aircraft engine designs, thereby hastening the realization of operating cost reductions and obviating the need for expensive aircraft FADEC overhauls. Second, since DIMSens digitizes and processes raw sensor data before relaying it via the data bus to other devices, the amount of wiring amongst devices is significantly reduced. This translates to weight reduction (which results in fuel savings) and decreased integration labor costs. Third, since DIMSens, which includes embedded prognostic and diagnostic tools, will be able to be located closer to monitored components than is currently possible with CCS architectures, DIMSens will be capable of diagnosing system faults (including self-faults) more accurately than the CCS architecture. As a result maintenance time and cost should be reduced. DIMSens has the potential for wide commercial reach. Any system that requires distributed health monitoring and/or control, especially in extreme environmental conditions, can effectively use DIMSens. DIMSens will initially be targeted at aircraft engine control applications. In the future DIMSens may be integrated into the control systems of ground vehicle engines, industrial processing equipment, energy generation equipment, and construction equipment.Luraco Technologies is a company that received a Department of Defense SBIR/STTR grant for a project entitled: Smart Autonomous Miniaturized Contamination Condition Sensor with Embedded Prognostics. The abstract given for this project is as follows: LURACO Technologies, Inc. proposes to develop a low-cost, accurate, and smart Multi-tasked Sensor (MultiSENS) that can be used to sense both the filter health as well as the fluid conditions. MultiSENS will directly replace the current Delta P indicator that is being used on current legacy aircrafts without interfering with the current wiring harnesses or system modification. MultiSENS can measure the differential pressure across the filter and determine the filter condition and predict the schedule for filter replacement. The basic function of MultiSENS is to automatically analyze and report the filter and oil condition. The proposed MultiSENS will be a complete, stand-alone sensing device that uses a MEMS multi-sensor chip to measure the pressure, dielectric constant, and temperature of fluid. MultiSENS will monitor the fluid and filter continuously or at scheduled intervals. The data captured by MultiSENS will be available for download via its data port, which implements a military-compatible communication protocol.

Luraco Technologies Headquarter Location

1132 107th Street

Arlington, Texas, 76011,

United States

817-633-1080

Predict your next investment

The CB Insights tech market intelligence platform analyzes millions of data points on venture capital, startups, patents , partnerships and news mentions to help you see tomorrow's opportunities, today.

Expert Collections containing Luraco Technologies

Expert Collections are analyst-curated lists that highlight the companies you need to know in the most important technology spaces.

Luraco Technologies is included in 1 Expert Collection, including Conference Exhibitors.

C

Conference Exhibitors

6,062 items

Companies that will be exhibiting at CES 2018

Luraco Technologies Patents

Luraco Technologies has filed 37 patents.

The 3 most popular patent topics include:

  • Chairs
  • Manual therapy
  • Fluid dynamics
patents chart

Application Date

Grant Date

Title

Related Topics

Status

6/12/2019

11/23/2021

Gas technologies, Industrial gases, Manual therapy, Chairs, Medical equipment

Grant

Application Date

6/12/2019

Grant Date

11/23/2021

Title

Related Topics

Gas technologies, Industrial gases, Manual therapy, Chairs, Medical equipment

Status

Grant

Latest Luraco Technologies News

Global Electric Massagers Market Report 2022: Panasonic, Medisana GmbH, Omron, Dr. Physio, LURACO Technologies, Shenzhen Relcare Electronics

Apr 10, 2022

Close Global Electric Massagers Market Report 2022: Panasonic, Medisana GmbH, Omron, Dr. Physio, LURACO Technologies, Shenzhen Relcare Electronics April 10, 2022 News Snapshot: Global Electric Massagers Market Report 2022: Panasonic, Medisana GmbH, Omron, Dr. Physio, LURACO Technologies, Shenzhen Relcare Electronics The latest study released on the Global Electric Massagers market by AMR Research evaluates market size, trend, and forecast to 2028. The Electric Massagers market study covers significant research data and proofs to be a handy resource document for managers, analysts, industry experts and other key people to have ready-to-access and self-analysed study to help understand market trends, growth drivers, opportunities and upcoming challenges and about the competitors. by AMR Research evaluates market size, trend, and forecast to 2028.

Luraco Technologies Web Traffic

Rank
Page Views per User (PVPU)
Page Views per Million (PVPM)
Reach per Million (RPM)
CBI Logo

Luraco Technologies Rank

  • Where is Luraco Technologies's headquarters?

    Luraco Technologies's headquarters is located at 1132 107th Street, Arlington.

Discover the right solution for your team

The CB Insights tech market intelligence platform analyzes millions of data points on vendors, products, partnerships, and patents to help your team find their next technology solution.

Request a demo

CBI websites generally use certain cookies to enable better interactions with our sites and services. Use of these cookies, which may be stored on your device, permits us to improve and customize your experience. You can read more about your cookie choices at our privacy policy here. By continuing to use this site you are consenting to these choices.