Data Connection Limited

Apr 20, 2023

April 20, 2023  |  Editorial Team AT&T Labs  has made the first  5G SA  Uplink 2-CA data connection in the U.S. to improve upload speeds, with additional speed and other upgrades in the works. AT&T  is architecting tomorrow’s wireless network to connect people to greater possibilities. As engineers, we design, build, test, refine and repeat so that you can get more out of your  5G  connection and developers can build and deploy the next generation of apps and services. A key part of this evolution is the critical transition phase we are entering in scaling from  5G non-standalone (NSA)  to  5G standalone (SA) . Unlike  5G NSA  which still relies on a 4G LTE core, 5G SA uses a dedicated 5G core that can unlock capabilities like faster upload speeds, ultra-low latency, ultra-high reliability and edge functions. This technology will be key to business opportunities like the next generation of connected cars. AT&T plans to deploy  Standalone 5G  when the ecosystem is ready, and they are charging forward to advance SA ecosystem readiness. Businesses and developers will be some of the first to take advantage of the new technologies standalone 5G enables as we continue to move from research & development to their deployment. Uplink: where challenge meets opportunity This new age of connectivity is not only about consuming more content but also generating more content than ever before. Demand for uplink capacity and speed continues to increase, about 30% a year in  AT&T ’s mobility network. Whether you are uploading large files, on a video call with family, live streaming, cloud gaming or using extended reality applications, the network is facing surging upstream traffic demands it never has before. AT&T 's latest network innovations are complex but are all about helping meet this new demand. AT&T completed the first 5G SA Uplink 2-carrier aggregation data call in the US. Carrier aggregation (CA)  means they are combining or “aggregating” different frequency bands to give more bandwidth and capacity. For the customer, this means faster uplink transmission speeds. Think of this as adding more lanes in the network traffic highway. No one in the U.S. market has successfully aggregated two carriers in 5G SA uplink – until now. This is part of our ongoing effort to provide greater reliability for our customers. The test was conducted in  AT&T labs  with Nokia’s  5G AirScale portfolio  and  MediaTek ’s 5G M80 mobile test platform. They aggregated their  low-band n5  and  mid-band n77 spectrum . Compared to the low-band n5 alone, they saw a 100% increase in uplink throughput by aggregating their low-band n5 with 40 MHz of the mid-band n77. Taking it a step further, they achieved a 250% increase aggregating 100 MHz of n77. The bottom line? AT&T  achieved incredible upload speeds of over 70 Mbps on n5 with 40 MHz of n77 and over 120 Mbps on n5 with 100 MHz of n77. While carrier aggregation is like adding more traffic lanes on the highway, adding another vehicle to carry traffic is another way  AT&T  is managing surging uplink demand. They are doing this via a two-layer uplink MIMO on time division duplex (TDD) in their mid-band n77. MIMO combines signals and data streams from multiple antennas (“vehicles”) to improve signal quality and data rates. This feature will not only improve uplink throughput but also enhance cell capacity and spectrum efficiency. Network design and device readiness go hand in hand Although  AT&T  continues to make progress in enhancing uplink coverage, they haven’t forgotten about the downlink. Enhanced downlink and uplink carrier aggregation capabilities work together to bring the 5G SA performance today’s technologies need. Last fall,  AT&T  completed a 5G SA four-component carrier downlink call by combining two FDD carriers and two TDD carriers. These capabilities allow AT&T devices to aggregate their mid-band n77 in the C-Band and 3.45 GHz spectrum ranges. Compared with the low band and mmWave spectrum, mid-band n77 provides a good balance between coverage and speed. This follows the 5G SA three-component carrier downlink feature that they introduced last year to 2022 AT&T Flagship devices which combines one frequency division duplex (FDD) carrier and two TDD carriers. In the coming months, AT&T will also enable 5G New Radio Dual Connectivity (NR-DC), aggregating their low and mid-band spectrum with their high-band mmWave spectrum on 5G SA. AT&T  Labs has achieved 5G NR-DC downlink throughput speeds of up to 5.3 Gbps and uplink throughput speeds of up to 670 Mbps. This technology will help provide high-speed mobile broadband for both downlink and uplink in stadiums, airports, and other high-density venues. The 5G SA ecosystem is rapidly evolving, with new technologies and capabilities being introduced to provide differentiated experiences. Here are some features that are on the horizon for 5G SA: Specialized Network Services – think network slicing, precision location, private routing, etc. – for tailored network solutions to meet specific user requirements; Non-terrestrial network solutions to supplement coverage in remote locations; and Reduced capability 5G (RedCap)  for a new generation of 5G capable wearables,  industrial IoT  or wireless sensors and other small form factor consumer devices. AT&T  is dedicated to being the best connectivity provider. The 5G SA ecosystem is rapidly evolving, with new technologies and capabilities being introduced to set the foundation for next-generation applications and services.